MCS-284 Lab 4: Studying Cache Auto-Prefetch Effectiveness (Fall 2000)

Due: December 8, 2000

In this lab, you will work together with a partner to gain experience in how hypotheses about memory system performance can be tested using trace-driven cache simulation.

Because there is an odd number of students, exactly one group should be of one or three rather than of two. Please try to find your own partners; if you want to be the group of one or three (with two others), or if you can't find a partner, see me. Each group should submit a single jointly authored lab report.

Important: It is important that you complete the Pre-Lab portion of this assignment before you start the In Lab portion.

Pre-Lab

Rather than waiting for the first access to a block to start fetching that block from main memory to the cache, it is possible to prefetch a block likely to be accessed soon. Our textbook mentions one form of prefetching, compiler-directed prefetching, on page 620. In this lab we will study a different form of prefetching, hardware prefetching or auto-prefetching, in which the cache hardware automatically chooses when to prefetch a block rather than relying on ``hints'' from the compiler. Generally this involves a very simple rule such as prefetching the next block after the one currently being accessed.

Auto-prefetch can decrease the miss rate if the prefetched blocks are used, but may also increase the amount of traffic between the main memory and the cache if the blocks go unused. In fact, if the prefetched blocks go unused, and bump other blocks out of the cache that would have been used, the miss rate can actually go up rather than down. A prefetch strategy is highly effective if it causes a substantial decrease in the miss rate with only a minor increase in memory traffic. For example, the miss rate might go down by 50% while the memory traffic goes up by 1%. In the other scenarios, where the miss rate doesn't go down much and/or the traffic goes up a lot, we can term the prefetch strategy ineffective (if the miss rate doesn't go down by much), costly (if the miss rate is substantially reduced, but at a high price in memory traffic), or counterproductive (if miss rate and traffic both go up).

The question you are to answer is this: what is the relationship between cache block size and total cache size and the cost and effectiveness of auto-prefetch? That is, if you consider a two-dimensional space of possible caches, where one dimension is block size and the other is total cache size, and you were to map out for each point in that two-dimensional space the percent increase in memory traffic that auto-prefetching would cause, what would it look like? Now suppose you mapped out for each point in the two-dimensional space the percent reduction (or increase!) in misses that auto-prefetching would cause, what does that look like? Putting these together, in what regions of the space is auto-prefetching cheap and highly effective? In which regions is it ineffective to the extent of being pointless? In which is it out and out harmful?

Before starting the lab, you should decide and write down the following two things:

  1. What is your hypothesis regarding the answer to the above questions? What is the rationale behind your hypothesis?
  2. What is your experimental plan for testing your hypothesis? In particular, what values of block size and total cache size are you going to use? (Note: all the block sizes must be multiples of four bytes, since all accesses are of four-byte words. Additionally, the block sizes and cache sizes should be powers of two.) What values are you going to use for the other cache parameters that you hold constant? Which of the various auto-prefetch variants supported by the dineroIII simulator are you going to use? Which address trace(s) are you going to use? In order to answer these questions, you will need to read ahead into the In Lab section below.

In Lab

You will use the dineroIII trace-driven cache simulator. A trace-driven cache simulator reads in a trace, that is, a record of the memory references from a particular execution (with each address tagged with whether it was a read, a write, or an instruction fetch). The simulator is parameterizable so that the same trace can be tried with a variety of different parameters for block size, associativity, cache size, prefetch strategy, etc. At the end of the simulation, a variety of statistics are produced, including the miss rate for the cache and the amount of memory traffic. DineroIII is a good quality, flexible simulator often used in such work.

We have available on-line traces from three benchmarks (tex, gcc, and spice). Each of the traces contains about a million memory references. The traces reside in the directory ~max/MC48, and have filenames tex.din.gz, cc1.din.gz, and spice.din.gz respectively. The .gz suffix indicates that they are compressed using the gzip program (to save disk space); to decompress them at the same time you run dineroIII, you can use a command that decompresses the file and "pipes" the decompressed version directly into dineroIII. On one of our Linux PCs, the command would be

zcat ~max/MC48/name.din.gz | ~max/MC48/dineroIII options
where name is the name of the trace you want to use and options is a list of dineroIII parameters as specified in the accompanying manual page for dineroIII. Note that at a bare minimum you need to specify the -b option and either the -u option or the -i and -d options. The -f option will also be particularly relevant to your investigation. Remember that the block size for the -b option is measured in bytes, so needs to be a multiple of four.

You should observe the improvement prefetching makes in the number of misses, specifically the so-called ``demand'' misses, i.e., the misses on those blocks actually requested by the CPU, rather than by the prefetching. You should also observe the increase in memory traffic caused by unnecessary prefetches. Further, it would be interesting to see whether instruction and data references are equally suited to auto-prefetching. (DineroIII prints out separate statistics in each category as well as totals.)

You may find it convenient to automate the data collection using a feature of the unix shell known as ``foreach.'' In particular, you can set up a shell script that uses nested foreach loops to run systematically through a collection of cache sizes, and for each of them through a collection of block sizes, and for each of them through a collection of traces, and for each of them through two prefetching strategies (don't prefetch, or some particular form of auto-prefetch). The exact nature of this will depend on what you are trying to do. The below is just an example, you should work from your own experimental design choices (from the pre-lab) regarding what ranges of values to iterate over. Keep in mind that you will need to analyze whatever data you generate, and it may be easier to generate lots of data than to analyze it. This example shell script, for instance, will do 120 experimental runs, creating an output file for each one. Each of those files will contain at least 4 interesting numbers. That would leave you with 480 numbers to make sense of.

foreach size (8k 16k 32k 64k 128k)
  foreach block (4 8 16 32)
    foreach bench (cc1 spice tex)
      foreach prefetch (d a)
         echo $bench $size $block $prefetch
         zcat ~max/MC48/"$bench".din.gz | ~max/MC48/dineroIII -b$block -d$size \
           -i$size -f$prefetch >"$bench"."$size"."$block"."$prefetch"
         echo $bench $size $block $prefetch done
      end
    end
  end
end
Note that although you could literally type something like the above into a shell window it is probably more sensible to store it in a file and then run it from the file. If you have it in a file called script, you could run it using the command
csh script

Post-Lab

Your lab report should not only clearly summarize the pre-lab and in lab portions of your work, it should also draw the two together by comparing your hypothesis with your observations. Write in clear technical English for an audience familiar with the material in our textbook but unfamiliar with this lab assignment. Be sure to present your experimental plan carefully enough that someone else could repeat your experiments and observe the same output numbers.

Instructor: Max Hailperin